Materials and tools to create art stucco preparation
1. Soak quicklime Alum and lime water fermentation in cement tanks for approximately 1 month to reduce the salinity of the first layer of plaster.
2. Sift the plaster. landed on the cement fermentation schedule one month ago and has taken heat on the wood grill. The objective is to scrap cement blocks. Or contaminated with lime mortar to make a fine-grained level. Then marinated in fresh water for about 1 week to reduce the salinity of the crab.
3. dry mortar and mortar from the second fermentation to dry. How to make a dry cement prior restraint is not too big. For the cement to dry. It takes about one week to dry and then stored in a tank for storage of cement blocks.
4. Grinding mortar and mortar prior to grinding the mixture lime 1 can glue leather 2 glasses of paper at the low and 1 cup of the crushed one by the time the ground for about 10 minutes grinding at it. here's the scoop from the steel mill, cement.
5. stucco Pound Pune low or stucco What a way to mix cement stucco diamond unique. The key ingredients are 5 to 1. Lime 2 parts. 2 sand 1 part 3. Jaggery or sugar (original juice) 4. Adhesive film (the original shell Padauk stew with cow). 5 paper ( original dried rice straw).
Lime water through the ground, then lower to the soft clay. Lime water has been low. Pass-friendly bag tightly tied bag. Ready to be used in the next production.
The mortar pounder takes about 1 hour later I noticed that the stucco. Pune has a very low or not. When the cement is low, then shovel into containers or plastic bags to keep. I started pounding again until enough cement to form a task. Pune will remain low to keep it soft. But it was not the weather. When it was put to use immediately. Most popular plastic bags immersed in water. Time to put it to use in order to cement hardens.
Step to Preparation glue leather
Prepare a mixture of glue, leather glue, 17 sheets of 7 kg of sugar, bring to a simmer.
Preparation of paper
The paper is soaked in water for a. After that, the lower the resolution. By mixing a little sand.
The process of creating art stucco
1. Creating configuration
If it is floating. modeller must be configured before the pump hole wall like a sculptor to design a paper pattern to the layout.
First class.
2. a lime plaster
stucco Pound Mortar Or Pound Diamond I need to design a paper pattern for a first-class layout. When drafting the modeller. I painted them. Or sometimes painted with lime to form a pattern on the finish. It can lead to mold cement plaster. To form a body called the "stirrup" the stirrup with cement to cement a placeholder. Persistence will not come easy. It would be one phase of the stirrup to stirrup pattern until the cement hardens, it will firmly cement pounder. Or Pound Diamond up to form another layer.
3. Molding
After the stirrups finished. It is the process of molding. Sculptor to mold according to customer orders. Or by the job. Gyan plaster molding plaster modeller to model the pattern outlined.
4. A decorative pattern
Decorative final. When a beautiful proportions. It is decorated with a molded glass or paint as the work. For glass is a traditional stucco is cheaper but less durable. I usually have a glass. The paint is a beautiful one. But usually stucco work focuses on the need to demonstrate the art of molding plaster hundred percent. The beauty of the light and shade of the molded piece at a time. The sculpture will be displayed dimension. A beauty that does not rely on the materials furnished by others. No paint or painted glass. But I molded a skilled technician. And have the ability to write Paint on the spin. The glass can be defined as an employer. Currently used for the garland to decorate a beautiful cause. But this set is adorned with expensive. And an array of things to the art of sculpture is molded into the block mentioned above. If a writing or marking Paint Thailand. I usually paint frescoes painted in the pattern including green, blue, brown, blue.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น